LumeLevel setup help

Setup videos are available inside your account.

Use these short videos with the written setup instructions. Videos are mapped by topic, so each setup page only shows the videos that belong there. Playback is loaded only after a logged-in user clicks Watch video.

Log in to watch videos Back to Portal Setup Guide
Video access: The library is visible here so you know video assistance is available, but playback is reserved for logged-in users.
Setting up your first tank Short video

Watch the first-tank setup flow: select the site, choose the tank shape, enter the tank measurements, and save the Main Tank.

Log in to watch video Video assistance is available inside your account.
  • Select the Complex and Building.
  • Choose the tank shape.
  • Enter inside measurements and High Water Overflow.
  • Save the Main Tank.
Add another tank and monitoring profile Short video

Watch how to add another tank and connect it with a monitoring profile so the portal is ready for device setup.

Log in to watch video Video assistance is available inside your account.
  • Open the portal setup area.
  • Add or open the tank record.
  • Create or open the monitoring profile.
  • Confirm the tank/profile relationship before hardware setup.
Manually enter tank level Short video

Watch how to enter a tank level manually when using the portal without a live sensor reading.

Log in to watch video Video assistance is available inside your account.
  • Open the tank status/manual update screen.
  • Enter the measured tank level.
  • Save the update.
  • Confirm the dashboard reflects the new reading.
Delete a tank Short video

Watch where to remove a tank when it should no longer be part of the account.

Log in to watch video Video assistance is available inside your account.
  • Open the tank management area.
  • Choose the tank carefully.
  • Confirm deletion only when the tank should be removed.
Add Reserve Tank on Sensor B Coming soon

Reserve Tank setup video placeholder. Add the Bunny player URL when this video is ready.

Coming soon This help video slot is ready and will appear in context after the Bunny player URL is added.
  • Confirm the Main Tank has reserve enabled.
  • Select the Main Tank the reserve belongs to.
  • Choose reserve tank shape and sensor type.
  • Enter reserve tank measurements and save.
Add Main Tank Object / Additional Measurements Coming soon

Main Tank object video placeholder. Add the Bunny player URL when this video is ready.

Coming soon This help video slot is ready and will appear in context after the Bunny player URL is added.
  • Enable additional tank measurements on the Main Tank.
  • Choose the object shape.
  • Choose ADD or SUBTRACT.
  • Enter the object measurements and save.
Add Reserve Tank Object / Additional Measurements Coming soon

Reserve Tank object video placeholder. Add the Bunny player URL when this video is ready.

Coming soon This help video slot is ready and will appear in context after the Bunny player URL is added.
  • Enable additional tank measurements on the Reserve Tank.
  • Choose the reserve object shape.
  • Choose ADD or SUBTRACT.
  • Enter the reserve object measurements and save.